A high-speed high-sensitivity detection device that recognize holes on cold-rolled steel plates during continuous run
Hole Detector TOSPECTRON-FCP-A
- Uses high-speed transmission scanner of CoaXpress standard
- Images are taken at intervals of approximately 60μs with calculation period of 10ms, detecting holes in real time
- Contour image of the hole is saved in PC for later reference and use.
|500 ～ 1850mm
|Hole detection sensitivity
|At 500m/min, 1.0mm holes can be detected
|Metal plate surface temperature
|100℃ and below
|Lateral variation range
|Pass line variation range
- * The specification shown above is an example. Actual specifications can be adjusted and may vary depending on installation conditions.