X-ray Thickness Gauge
Renewed X-ray thickness gauge series with innovated main calculation.
The X-ray generator is compatible with conventional models.
- 1. The real time OS installed in the industrial computer improves maintainability.
- 2. Various interfaces (Ethernet, Profibus, FL-net, etc.) are supported.
- 3. The connectors of the X-ray generator need not be greased up.
- 4. A large-diameter ionization chamber realizes a quick response and high accuracy.
This table can be scrolled horizontally.
|Measuring range||(Cold)||0.1 ～ 8.0mm|
|(Hot)||1.0 ～ 15.99mm|
|Linearity||0.1% of set thickness (2σ)|
|Reproducibility||0.05% set thickness or 0.1μm
whichever is larger(2σ)
|(Cold)||0.05% measured thickness or 0.1μm
whichever is larger (1.65σ)
|(Hot)||0.06% for thickness range of 1.0 ～ 7.99mm(2σ)
0.10% for thickness range of 8.0 ～ 13.99mm(2σ)
0.12% for thickness range of 14.0 ～ 15.99mm(2σ)
|Drift||0.1% of measured thickness/8h (Based on IEC61336)|
- * A large measurement range is available.
- * The specification shown above is an example. Actual specifications can be adjusted and may vary depending on installation conditions.